Introducción
Quita la tapa de acceso para reemplazarla o acceder a el RAM.
Qué necesitas
-
-
Afloja los tres tornillos Phillips que sujetan la tapa de acceso al extremo inferior de tu iMac.
-
Quita la tapa de acceso de tu iMac.
-
-
Para reensamblar tu dispositivo, sigue las instrucciones en sentido contrario.
Para reensamblar tu dispositivo, sigue las instrucciones en sentido contrario.
Cancelar: No complete esta guía.
24 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
I am going to put a very important comment here. Before you start this process listen to the fans on your iMac do any of them sound obviously loud (think about how quiet your iMac used to sound as a reference) If you notice one or more of them sounding substantially loud compared to the others consider locating a replacement fan prior starting this process. After all if you are already “in the neighborhood” it is a shame to do all this work only to have to disassemble your imac a couple weeks later because you realize the fan is failing. I speak from my own personal learning experience of having to disassembly my iMac 3 weeks later because the HDD was failing and apparently the moving the fan around was just enough to push it to start really under performing.
Wizbang FL - Contestar
I’m not sure why it is necessary to remove the RAM. As far as I can tell, it can remain in place during this procedure.
gordonhamachi - Contestar