Repara tus cosas Comunidad Tienda

RedOctane X-Plorer Strum Bar Replacement

Introducción

The guitar strings often catch on the plastic case or wear over time. This guide demonstrates how to access the internal components of the strings and diagnose hidden problems.

Qué necesitas

  1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: paso 1, imagen 1 de 2 RedOctane X-Plorer Strum Bar Replacement, Rear Case: paso 1, imagen 2 de 2

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Traducir

  2. RedOctane X-Plorer Strum Bar Replacement: paso 2, imagen 1 de 3 RedOctane X-Plorer Strum Bar Replacement: paso 2, imagen 2 de 3 RedOctane X-Plorer Strum Bar Replacement: paso 2, imagen 3 de 3

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Traducir

  4. RedOctane X-Plorer Strum Bar Replacement: paso 3, imagen 1 de 3 RedOctane X-Plorer Strum Bar Replacement: paso 3, imagen 2 de 3 RedOctane X-Plorer Strum Bar Replacement: paso 3, imagen 3 de 3

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Traducir

  5. RedOctane X-Plorer Strum Bar Replacement, Strum Bar: paso 4, imagen 1 de 1

    • Using two hands, gently remove the two string rod fixtures.

    Traducir

  6. RedOctane X-Plorer Strum Bar Replacement: paso 5, imagen 1 de 1

    • Lift up on the strum bar to remove it from the guitar.

    Traducir

  7. RedOctane X-Plorer Strum Bar Replacement: paso 6, imagen 1 de 2 RedOctane X-Plorer Strum Bar Replacement: paso 6, imagen 2 de 2

    • Remove the string rod by gently pulling it out of the strum bar.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Jared McMullen

Miembro Desde 04/18/18

276 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team S17-G1, Livingston Spring 2018 Miembro de Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

3 Miembros

9 Guías creadas

2 comentarios

I had a squeaking strum bar so I followed this guide to dismantle and clean the parts. Other than the one step missed in the guide it was easy to follow. It also stopped the squeaking!

Zachary Avery - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 21

Ultimos 30 días: 49

Todo El Tiempo: 3,586