Repara tus cosas Comunidad Tienda

RedOctane X-Plorer Rear Case Replacement

Introducción

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

Qué necesitas

  1. RedOctane X-Plorer Rear Case Replacement, Rear Case: paso 1, imagen 1 de 2 RedOctane X-Plorer Rear Case Replacement, Rear Case: paso 1, imagen 2 de 2

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Editar

  3. RedOctane X-Plorer Rear Case Replacement: paso 2, imagen 1 de 3 RedOctane X-Plorer Rear Case Replacement: paso 2, imagen 2 de 3 RedOctane X-Plorer Rear Case Replacement: paso 2, imagen 3 de 3

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Editar

  4. RedOctane X-Plorer Rear Case Replacement: paso 3, imagen 1 de 3 RedOctane X-Plorer Rear Case Replacement: paso 3, imagen 2 de 3 RedOctane X-Plorer Rear Case Replacement: paso 3, imagen 3 de 3

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Riley

Miembro Desde 04/18/18

649 Reputación

7 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team S17-G1, Livingston Spring 2018 Miembro de Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

3 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 527