Saltar al contenido principal

Rear Case Replacement

Qué necesitas

  1. Rear Case Replacement, Rear Case: paso 1, imagen 1 de 3 Rear Case Replacement, Rear Case: paso 1, imagen 2 de 3 Rear Case Replacement, Rear Case: paso 1, imagen 3 de 3
    • Remove the seven highlighted screws shown here.

    • Screws are teeny tiny, don't lose them!

  2. Rear Case Replacement: paso 2, imagen 1 de 2 Rear Case Replacement: paso 2, imagen 2 de 2
    • Remove this final screw from the memory card compartment.

    • Remove the chassis by pulling the back cover away from the camera.

    • Be careful not to damage any of the delicate ribbon cables when removing the chassis.

  3. Rear Case Replacement: paso 3, imagen 1 de 2 Rear Case Replacement: paso 3, imagen 2 de 2
    • Gently but forcefully lift up on the parallel cable connecting the two halves of the camera.

Linea de Meta

4 personas más completaron esta guía.

Equipo

USF Tampa, Team 4-4, Meier Fall 2015 Miembro de USF Tampa, Team 4-4, Meier Fall 2015

USFT-MEIER-F15S4G4

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 706