Saltar al contenido principal

Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Qué necesitas

  1. Razor Hovertrax 2.0 Anti-Slip Pads Replacement, Anti-Slip Pads: paso 1, imagen 1 de 1
    • Choose an area to access and slip the Jimmy blade to pry open the pad.

    • We recommend prying the pad open from the top and bottom instead of the sides due to the plastic wheel cover blocking the access point.

  2. Razor Hovertrax 2.0 Anti-Slip Pads Replacement: paso 2, imagen 1 de 1
    • After using the Jimmy tool to open up the area, use your hands and slowly peel off the adhesive from the pad and board.

    • You may be required to remove the remaining adhesive on the board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 32