Repara tus cosas Comunidad Tienda

Razer Huntsman Tournament Edition Key Switch Replacement

Introducción

If either your switch action is undesirable, the LEDs aren't working, or the key function isn't working at all, you may want to replace the switches. This guide should take well over an hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard.

You must know how to remove the case in order to complete this guide.

Qué necesitas

  1. Razer Huntsman Tournament Edition Key Switch Replacement, Keycaps: paso 1, imagen 1 de 1

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    Editar

  2. Razer Huntsman Tournament Edition Key Switch Replacement: paso 2, imagen 1 de 2 Razer Huntsman Tournament Edition Key Switch Replacement: paso 2, imagen 2 de 2

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    Editar

  3. Razer Huntsman Tournament Edition Key Switch Replacement: paso 3, imagen 1 de 3 Razer Huntsman Tournament Edition Key Switch Replacement: paso 3, imagen 2 de 3 Razer Huntsman Tournament Edition Key Switch Replacement: paso 3, imagen 3 de 3

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    Editar

  5. Razer Huntsman Tournament Edition Key Switch Replacement, Chassis: paso 4, imagen 1 de 1

    • Remove all of the keycaps with a keycap puller.

    Editar

  6. Razer Huntsman Tournament Edition Key Switch Replacement: paso 5, imagen 1 de 2 Razer Huntsman Tournament Edition Key Switch Replacement: paso 5, imagen 2 de 2

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    Editar

  7. Razer Huntsman Tournament Edition Key Switch Replacement: paso 6, imagen 1 de 1

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    Editar

  8. Razer Huntsman Tournament Edition Key Switch Replacement: paso 7, imagen 1 de 1

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    Editar

  9. Razer Huntsman Tournament Edition Key Switch Replacement: paso 8, imagen 1 de 1

    • Disconnect the internal cable.

    Editar

  10. Razer Huntsman Tournament Edition Key Switch Replacement, Key Switch: paso 9, imagen 1 de 2 Razer Huntsman Tournament Edition Key Switch Replacement, Key Switch: paso 9, imagen 2 de 2

    • Gently push the key switch off of the mainboard with your thumb.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Joseph O'Dowd

Miembro Desde 10/25/22

383 Reputación

3 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 Miembro de UMass Dartmouth, Team 4-3, Sinclaire Fall 2022

UMASSD-SINCLAIRE-F22S4G3

5 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 42

Todo El Tiempo: 1,170