Introducción
The optical sensor for the Razer DeathAdder Chroma is a crucial component for the device’s operation. A critical failure of the optical sensor will necessarily require a replacement.
Qué necesitas
-
-
-
Disconnect the ribbon connector between the motherboard and the USB cable by pulling upward.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
2 comentarios
Where do I get the part?
This is not a sensor, but a sensor backlight. Sensor on the underside of the main board