Repara tus cosas Comunidad Tienda

Razer Blade RZ09-0102 Speakers Replacement

Introducción

The main reason you would want to replace the speakers in your laptop would be that they are faulty and not producing sound. Another might be that you just want to upgrade to a better speaker. The speakers in this device are located on the outer left and right sides of the motherboard. The speakers dimensions are 1 x 1.75.

Qué necesitas

  1. Razer Blade RZ09-0102 Speakers Replacement, Rear Panel: paso 1, imagen 1 de 1

    • Before you begin, be sure to turn off your laptop.

    • Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.

    • Remove the back cover.

    Traducir

  2. Razer Blade RZ09-0102 Speakers Replacement, Speakers: paso 2, imagen 1 de 2 Razer Blade RZ09-0102 Speakers Replacement, Speakers: paso 2, imagen 2 de 2

    • Using a Phillips #0 screwdriver, remove the two screws holding down the speaker.

    Traducir

  4. Razer Blade RZ09-0102 Speakers Replacement: paso 3, imagen 1 de 1

    • Disconnect the wire by pinching with your fingers and pulling up.

    Traducir

  5. Razer Blade RZ09-0102 Speakers Replacement: paso 4, imagen 1 de 1

    • Remove the speaker.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 1,057