Repara tus cosas Comunidad Tienda

RYOBI P422 Body Replacement

Qué necesitas

  1. RYOBI P422 Body Replacement, Battery and Handle: paso 1, imagen 1 de 2 RYOBI P422 Body Replacement, Battery and Handle: paso 1, imagen 2 de 2

    • To remove the battery press down on the two buttons located on each side of the battery and pull away from the body of the grinder.

    • To remove the handle hold grinder with one hand and use the other hand to unscrew the handle with a counter-clockwise motion

    Editar

  2. RYOBI P422 Body Replacement, Body: paso 2, imagen 1 de 1

    • Lay the grinder flat on its side so the screws are facing up.

    Editar

  3. RYOBI P422 Body Replacement: paso 3, imagen 1 de 3 RYOBI P422 Body Replacement: paso 3, imagen 2 de 3 RYOBI P422 Body Replacement: paso 3, imagen 3 de 3

    • Remove the four 1.8 cm screws from the lower and mid section of the body with the Torx T20 screwdriver.

    • Remove the 3.7 cm screws from the upper section of the body, with the same screwdriver.

    Editar

  5. RYOBI P422 Body Replacement: paso 4, imagen 1 de 2 RYOBI P422 Body Replacement: paso 4, imagen 2 de 2

    • Now that the two halves are unscrewed, lift up the top half.

    Editar

  6. RYOBI P422 Body Replacement: paso 5, imagen 1 de 3 RYOBI P422 Body Replacement: paso 5, imagen 2 de 3 RYOBI P422 Body Replacement: paso 5, imagen 3 de 3

    • Remove the safety trigger and the spring.

    • Be careful in removing the safety trigger, the pin may fall out as you are moving it.

    Editar

  7. RYOBI P422 Body Replacement: paso 6, imagen 1 de 2 RYOBI P422 Body Replacement: paso 6, imagen 2 de 2

    • Lift up main trigger and spring together.

    • By lifting this trigger and spring out of the handle, you will pull double duty by lifting the black switch box off of its two support posts.

    • Slide the trigger off of the black switch box.

    • Be careful when removing trigger, the spring will be compressed and may move unexpectedly.

    Editar

  8. RYOBI P422 Body Replacement: paso 7, imagen 1 de 3 RYOBI P422 Body Replacement: paso 7, imagen 2 de 3 RYOBI P422 Body Replacement: paso 7, imagen 3 de 3

    • Lift the battery lead bracket from its slot.

    • Use the PH 1 screwdriver to unscrew the two 0.7 cm screws that hold the 2.6 cm long brass bracket in place.

    • Use tweezers to remove the brass bracket.

    • During reassembly, remember to keep the spring inside the main trigger and against the bracket that is visible in the second of the accompanying photos.

    Editar

  9. RYOBI P422 Body Replacement: paso 8, imagen 1 de 2 RYOBI P422 Body Replacement: paso 8, imagen 2 de 2

    • Flip the grinder over and lift off the second half of the body.

    • Now you can replace your damaged handles with a new pair.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

John Lamanuzzi

Miembro Desde 03/20/15

229 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

UMass Dartmouth, Team 3-6, Duarte Spring 2015 Miembro de UMass Dartmouth, Team 3-6, Duarte Spring 2015

UMASSD-DUARTE-S15S3G6

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 1,382