Saltar al contenido principal
RK5 PLUS VR Headset Headband Replacement

RK5 PLUS VR Headset Headband Replacement

Faraaz Abdul

Faraaz Abdul y 3 otros contribuidores

Última actualización: June 1, 2023

10 - 15 minutos
Muy fácil

Introducción

Ir al paso 1

Follow this comprehensive guide to repair a broken headband for your RK5 Plus Virtual Reality Glasses Case. The headband is an important component of your VR headset as it keeps the device securely on your head. Due to frequent use and the pressure exerted on it, the headband of this VR headset may become overstretched, snap or rip. This guide will show you how to replace the headband of your RK5 Plus Virtual Reality Glasses Case.

Qué necesitas

iFixit gana una comisión si finalizas una compra usando estos enlaces.
  1. RK5 PLUS VR Headset Headband Replacement, Headband: paso 1, imagen 1 de 3 RK5 PLUS VR Headset Headband Replacement, Headband: paso 1, imagen 2 de 3 RK5 PLUS VR Headset Headband Replacement, Headband: paso 1, imagen 3 de 3
    • Place the headset right side up and facing you on a flat surface.

    • Gently detach the velcro straps from the top, left, and right sides of the headset and set them aside.

  2. RK5 PLUS VR Headset Headband Replacement: paso 2, imagen 1 de 1
    • Remove the white headband adjustment part and carefully pull it off of the three straps.

  3. RK5 PLUS VR Headset Headband Replacement: paso 3, imagen 1 de 3 RK5 PLUS VR Headset Headband Replacement: paso 3, imagen 2 de 3 RK5 PLUS VR Headset Headband Replacement: paso 3, imagen 3 de 3
    • To access the straps that need to be replaced, remove the padding around the visual lenses of the headset.

    • To do this, use your hands to detach the plastic frame between the padding and the lenses.

    • If you need help getting started, use a spudger or opening tool and undo the clips holding the plastic frame.

    • Unhook the old straps from the sides of the headset.

  4. RK5 PLUS VR Headset Headband Replacement: paso 4, imagen 1 de 3 RK5 PLUS VR Headset Headband Replacement: paso 4, imagen 2 de 3 RK5 PLUS VR Headset Headband Replacement: paso 4, imagen 3 de 3
    • Reattach the new velcro straps to each of the white hooks.

    • Make sure the straps are securely attached to the hooks before moving on to the next step.

  5. RK5 PLUS VR Headset Headband Replacement: paso 5, imagen 1 de 2 RK5 PLUS VR Headset Headband Replacement: paso 5, imagen 2 de 2
    • Reattach the plastic frame with the padded back onto the headset.

    • Make sure the padding is properly aligned and clicked into place.

  6. RK5 PLUS VR Headset Headband Replacement: paso 6, imagen 1 de 3 RK5 PLUS VR Headset Headband Replacement: paso 6, imagen 2 de 3 RK5 PLUS VR Headset Headband Replacement: paso 6, imagen 3 de 3
    • Reattach the top band into the top hook of the headset.

    • Take the other sides of the velcro straps and hook them into the white headband adjustment part.

    • Check that the straps are properly aligned and securely attached to the headband adjustment part.

  7. RK5 PLUS VR Headset Headband Replacement: paso 7, imagen 1 de 1
    • You have successfully replaced your damaged headbands for the RK5 Plus VR headset!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Faraaz Abdul

Miembro Desde 01/30/23

145 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 281