Saltar al contenido principal

RIDGID R860052 Motor Replacement

Qué necesitas

  1. RIDGID R860052 Motor Replacement, Motor: paso 1, imagen 1 de 2 RIDGID R860052 Motor Replacement, Motor: paso 1, imagen 2 de 2
    • Remove the battery from the drill before you begin.

    • Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.

    • These ten screws are 19 mm long.

  2. RIDGID R860052 Motor Replacement: paso 2, imagen 1 de 1
    • Lift off and remove the cover with the informational label.

  3. RIDGID R860052 Motor Replacement: paso 3, imagen 1 de 3 RIDGID R860052 Motor Replacement: paso 3, imagen 2 de 3 RIDGID R860052 Motor Replacement: paso 3, imagen 3 de 3
    • Remove the switch assembly, chuck, and motor from all drill covers.

  4. RIDGID R860052 Motor Replacement: paso 4, imagen 1 de 2 RIDGID R860052 Motor Replacement: paso 4, imagen 2 de 2
    • Twist the chuck and motor in the opposite direction and gently pull them apart.

  5. RIDGID R860052 Motor Replacement: paso 5, imagen 1 de 3 RIDGID R860052 Motor Replacement: paso 5, imagen 2 de 3 RIDGID R860052 Motor Replacement: paso 5, imagen 3 de 3
    • Desolder the black and red wires from the motor.

    • Replace motor and resolder the black and red wires back onto the motor.

    • Be aware of the heat level of the metal part on the soldering tool.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

UC Davis, Team S18-G4, Lore Winter 2019 Miembro de UC Davis, Team S18-G4, Lore Winter 2019

UCD-LORE-W19S18G4

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 481