Saltar al contenido principal

RCA 10 Viking Pro RCT6K03W13 Backplate Replacement

Qué necesitas

  1. RCA 10 Viking Pro RCT6K03W13 Backplate Replacement, Backplate: paso 1, imagen 1 de 3 RCA 10 Viking Pro RCT6K03W13 Backplate Replacement, Backplate: paso 1, imagen 2 de 3 RCA 10 Viking Pro RCT6K03W13 Backplate Replacement, Backplate: paso 1, imagen 3 de 3
    • Remove the three Phillips #00 screws at the bottom of the device.

  2. RCA 10 Viking Pro RCT6K03W13 Backplate Replacement: paso 2, imagen 1 de 2 RCA 10 Viking Pro RCT6K03W13 Backplate Replacement: paso 2, imagen 2 de 2
    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

  3. RCA 10 Viking Pro RCT6K03W13 Backplate Replacement: paso 3, imagen 1 de 1
    • Pull on one of the bottom corners to begin to pull off the back plate.

  4. RCA 10 Viking Pro RCT6K03W13 Backplate Replacement: paso 4, imagen 1 de 2 RCA 10 Viking Pro RCT6K03W13 Backplate Replacement: paso 4, imagen 2 de 2
    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ryan Wickett

Miembro Desde 10/25/19

632 Reputación

3 Guías creadas

Equipo

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 451