Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use plastic opening tools to pry open the rear casing of the your Quantum Axis A23. Slide the tool along the edges to release the plastic tabs.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the device is open, remove the tape from the the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pry up the battery by wedging the plastic opening tool under the battery. It is glued to the screen so it will be a delicate removal process.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the battery is removed, take wire cutters to the two wires attaching the battery to the motherboard and cut the red and black wires in the middle. Then, strip the both the red and black wires halfway with the wire stripper/cutter tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Take the new battery and strip both the red and black wires in the middle with wire stripper/cutter tool.
-
Take the red wire from the battery and the red wire from your device's motherboard and twist the two ends together then wrap in electrical tape. Repeat this step for the black wires.
-