Repara tus cosas Comunidad Tienda

QFX IT-437 Camera Assembly Replacement

Introducción

This guide shows what's involved and the how-to in replacing the camera on the tablet device.

Qué necesitas

  1. QFX IT-437 Camera Assembly Replacement, Camera Assembly: paso 1, imagen 1 de 1

    • Begin the process by using a PH00 Phillips screw driver.

    • Remove the two 1.2mm x 3mm screws at the bottom of the tablet.

    Editar

  2. QFX IT-437 Camera Assembly Replacement: paso 2, imagen 1 de 2 QFX IT-437 Camera Assembly Replacement: paso 2, imagen 2 de 2

    • Use the iFixit plastic opening tool to pry open the back of the tablet.

    • Do not remove the back case completely as tape has to be removed from the wires, and pulling the case apart can tear off the wires.

    Editar

  4. QFX IT-437 Camera Assembly Replacement: paso 3, imagen 1 de 1

    • Use the spudger to unhinge the camera from its socket.

    Editar

  5. QFX IT-437 Camera Assembly Replacement: paso 4, imagen 1 de 1

    • Use the plastic opening pick and the Phillips screwdriver to remove the camera from its soldering on the motherboard, and set it aside to be replaced.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Douglas

Miembro Desde 01/28/15

482 Reputación

4 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

Pasco Hernando, Team 5-2, Prince Winter 2015 Miembro de Pasco Hernando, Team 5-2, Prince Winter 2015

PHSC-PRINCE-W15S5G2

6 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 107