Saltar al contenido principal

Partes

No se especificaron partes.

  1. Purple SmartVP Mount Replacement, Mount: paso 1, imagen 1 de 3 Purple SmartVP Mount Replacement, Mount: paso 1, imagen 2 de 3 Purple SmartVP Mount Replacement, Mount: paso 1, imagen 3 de 3
    • Remove the top bar by removing the 5cm hex T10 screws on the back of the device as shown. Then gently pull off the top bar from the main component.

  2. Purple SmartVP Mount Replacement: paso 2, imagen 1 de 2 Purple SmartVP Mount Replacement: paso 2, imagen 2 de 2
    • Locate and release the flap on the side of your device's mount. This will allow you to slide the adjustable portion of the mount.

  3. Purple SmartVP Mount Replacement: paso 3, imagen 1 de 2 Purple SmartVP Mount Replacement: paso 3, imagen 2 de 2
    • Using a #4.0 flathead screwdriver, unscrew your mount from the bottom and remove the 1.2cm screw.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 72