Introducción

This guide will walk you through how to remove the motor propeller from the drone. This is a very simple process, and minimal tooling is required. This guide is useful for replacing blades that may have been damaged.

Partes

No se requieren partes.

  1. Remove the chrome shaft cover by lightly pulling it away from the drone.
    • Remove the chrome shaft cover by lightly pulling it away from the drone.

  2. Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.
    • Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.

    • Be sure to apply adequate pressure when removing the screw to prevent stripping it out.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the propeller stop from shaft by lightly pulling it away from the drone.
    • Remove the propeller stop from shaft by lightly pulling it away from the drone.

  5. Remove the propeller from shaft by lightly pulling it away from the drone.
    • Remove the propeller from shaft by lightly pulling it away from the drone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

UW Stout, Team S8-G4, Ogden Spring 2018 Miembro de UW Stout, Team S8-G4, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G4

4 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 2

Todo El Tiempo: 56