Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide will walk you through how to separate the upper and lower housing units of the drone. Minimal tooling is required; however, prerequisite steps are required. This guide is useful for accessing internal components of the drone.
Qué necesitas
-
-
-
Remove the 8mm long Phillips #0 screws (24 total) from the lower housing unit.
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.