Repara tus cosas Comunidad Tienda

Protocol Dronium 3x Controller Battery Replacement

Introducción

The Protocol Dronium 3x remote controller is used to control the drone. The controller uses 4 AA batteries that are accessed on the back side of the controller. The Protocol Dronium 3x can also be controlled via the Protocol app on both the Apple App Store and Google Play Store.

Qué necesitas

  1. Protocol Dronium 3x Controller Battery Replacement, Controller Battery: paso 1, imagen 1 de 2 Protocol Dronium 3x Controller Battery Replacement, Controller Battery: paso 1, imagen 2 de 2

    • Ensure the controller is powered off.

    • Using a Phillips #0 screwdriver, unscrew the screw holding the battery lid on the controller. Keep in mind that the screw will be attached to the lid.

    • Remove lid and screw.

    Editar

  3. Protocol Dronium 3x Controller Battery Replacement: paso 2, imagen 1 de 1

    • Remove batteries from battery compartment.

    • Discard the used batteries.

    • Place new batteries in the controller in the correct orientation.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Alexander George

Miembro Desde 09/17/18

395 Reputación

4 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Washington State, Team S29-G7, Hope Fall 2018 Miembro de Washington State, Team S29-G7, Hope Fall 2018

WSU-HOPE-F18S29G7

Miembros de 3

4 Guías creadas

0Guía Comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 262