Saltar al contenido principal

ProScan PLT7223G Motherboard Replacement

Qué necesitas

  1. ProScan PLT7223G Motherboard Replacement, Motherboard: paso 1, imagen 1 de 1
    • Remove both 4 mm screws from the top of the tablet using a PH00 screw driver.

  2. ProScan PLT7223G Motherboard Replacement: paso 2, imagen 1 de 1
    • Use the blue opening tool to pry the tablet open.

  3. ProScan PLT7223G Motherboard Replacement: paso 3, imagen 1 de 2 ProScan PLT7223G Motherboard Replacement: paso 3, imagen 2 de 2
    • Remove all yellow tape from the motherboard.

  4. ProScan PLT7223G Motherboard Replacement: paso 4, imagen 1 de 3 ProScan PLT7223G Motherboard Replacement: paso 4, imagen 2 de 3 ProScan PLT7223G Motherboard Replacement: paso 4, imagen 3 de 3
    • With the soldering tool remove the speaker wires, battery wires and gray wire that are connected to the motherboard.

    • Pay close attention to where each wire goes, so that you reconnect them in the correct order.

  5. ProScan PLT7223G Motherboard Replacement: paso 5, imagen 1 de 3 ProScan PLT7223G Motherboard Replacement: paso 5, imagen 2 de 3 ProScan PLT7223G Motherboard Replacement: paso 5, imagen 3 de 3
    • Lift all three ZIF connectors to disconnect the ribbon wire.

  6. ProScan PLT7223G Motherboard Replacement: paso 6, imagen 1 de 1
    • Use a PH00 screw driver to remove the three 4 mm screws holding the motherboard down.

  7. ProScan PLT7223G Motherboard Replacement: paso 7, imagen 1 de 1
    • Lift the motherboard off the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Un comentario

Once the motherboard is out, what do you do ? Where do I go? More information would be appreciated.

rainbowsend14 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 6

Todo El Tiempo: 1,469