Repara tus cosas Comunidad Tienda

ProScan PLT7223G Front Facing Camera Replacement

Introducción

Blurry photos? Camera not working at all? Use this guide to replace the camera.

Qué necesitas

  1. ProScan PLT7223G Front Facing Camera Replacement, Front Facing Camera: paso 1, imagen 1 de 1

    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

    Editar

  2. ProScan PLT7223G Front Facing Camera Replacement: paso 2, imagen 1 de 1

    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

    Editar

  4. ProScan PLT7223G Front Facing Camera Replacement: paso 3, imagen 1 de 1

    • With a spudger, flip up the ZIF connector that connects the camera's ribbon cable to the motherboard. This will release the ribbon cable.

    Editar

  5. ProScan PLT7223G Front Facing Camera Replacement: paso 4, imagen 1 de 1

    • Remove the black tape holding down the ribbon cable.

    Editar

  6. ProScan PLT7223G Front Facing Camera Replacement: paso 5, imagen 1 de 1

    • Remove camera.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 243