Saltar al contenido principal

Presto PopLite 04820 Popping Chamber Base Replacement

Qué necesitas

  1. Presto PopLite 04820 Popping Chamber Base Replacement, Baseplate: paso 1, imagen 1 de 1
    • Be sure that the popper is unplugged before disassembly.

    • Turn Presto Popper upside down.

  2. Presto PopLite 04820 Popping Chamber Base Replacement: paso 2, imagen 1 de 3 Presto PopLite 04820 Popping Chamber Base Replacement: paso 2, imagen 2 de 3 Presto PopLite 04820 Popping Chamber Base Replacement: paso 2, imagen 3 de 3
    • Remove the four 9 mm Phillips #2 screws from the base.

    • Once all four screws are removed, take the base off.

  3. Presto PopLite 04820 Popping Chamber Base Replacement, Popping Chamber Base: paso 3, imagen 1 de 2 Presto PopLite 04820 Popping Chamber Base Replacement, Popping Chamber Base: paso 3, imagen 2 de 2
    • Remove the four 13 mm Phillips #2 screws.

  4. Presto PopLite 04820 Popping Chamber Base Replacement: paso 4, imagen 1 de 1
    • Remove the entire cavity that holds the motor from the base of the PopLite.

    • Be gentle while taking the motor out of the base to avoid wire damage.

  5. Presto PopLite 04820 Popping Chamber Base Replacement: paso 5, imagen 1 de 2 Presto PopLite 04820 Popping Chamber Base Replacement: paso 5, imagen 2 de 2
    • Turn the popping chamber base sideways.

    • Now remove popping chamber base.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Emanuele Rocco

Miembro Desde 08/27/15

694 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 2-5, Blackwell Fall 2015 Miembro de USF Tampa, Team 2-5, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G5

2 Miembros

6 Guías creadas

Un comentario

Where can I get the new base from?

Barry - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 612