Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
So, here it is, Sunday evening and my daughter attempts to make popcorn that we all get to enjoy while watching a movie. Gets the kernels, puts them into the popper, plugs it in and.....nothing. Daddy can you 'fixit'? Will see what we find....
Qué necesitas
-
-
This is the Hot Air Popper. worked pretty good and has lots of 'miles' on it. We used it often, and it did work well. New one would be about $20 at some major department stores.
-
But hey, I am frugal....
-
-
-
-
The bottom cover is fastened with four screws. Remove those.
-
Once the bottom cover is removed, the blower motor is clearly visible.
-
Where the power cable attaches to the motor, are four diodes. These diodes only allow half-cycle of a full cycle of positive and negative power cycle to reach the motor.
-
The motor only gets current in one direction,allowing it to spin in one direction. After all, we are dealing with AC current here.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
6 personas más completaron esta guía.