Saltar al contenido principal

Introducción

Removing the graphics card.

Partes

No se especificaron partes.

  1. Pull on outer latch. Lower door until it is level with your work surface.
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Remove the single screw with the Phillips #1 screwdriver. Pull the graphics card up and out.
    • Remove the single screw with the Phillips #1 screwdriver.

    • Pull the graphics card up and out.

Linea de Meta

12 personas más completaron esta guía.

Justin Petrilli

Miembro Desde 21/01/10

2,712 Reputación

11 Guías creadas

Equipo

Cal Poly, Team 13-24, Maness Winter 2010 Miembro de Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Miembros

18 Guías creadas

Do I need to avoid static to protect the board?

Jim Robson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 12

Últimos 30 Días: 34

Todo El Tiempo: 8,442