Repara tus cosas Comunidad Tienda

PowerLead Puto PLD003 Tripod Clip Replacement

Introducción

This guide shows how to remove the screws that hold the camera together, remove the side panel from the camera, and how to remove the tripod clip.

Qué necesitas

  1. PowerLead Puto PLD003 Tripod Clip Replacement, Side Panel: paso 1, imagen 1 de 1

    • Slide the battery eject button open to release the battery door.

    Traducir

  2. PowerLead Puto PLD003 Tripod Clip Replacement: paso 2, imagen 1 de 1

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    Traducir

  4. PowerLead Puto PLD003 Tripod Clip Replacement: paso 3, imagen 1 de 1

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    Traducir

  5. PowerLead Puto PLD003 Tripod Clip Replacement: paso 4, imagen 1 de 1

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    Traducir

  6. PowerLead Puto PLD003 Tripod Clip Replacement, Tripod Clip: paso 5, imagen 1 de 2 PowerLead Puto PLD003 Tripod Clip Replacement, Tripod Clip: paso 5, imagen 2 de 2

    • Apply pressure upwards to remove the tripod clip.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 137