Repara tus cosas Comunidad Tienda

PowerLead Puto PLD003 Side Panel Replacement

Introducción

This guide will show you how to remove the PowerLead Puto PLD003 side panel. The removal of the side panel is necessary, in order to, replace most parts.

Qué necesitas

  1. PowerLead Puto PLD003 Side Panel Replacement, Side Panel: paso 1, imagen 1 de 1

    • Slide the battery eject button open to release the battery door.

    Traducir

  2. PowerLead Puto PLD003 Side Panel Replacement: paso 2, imagen 1 de 1

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    Traducir

  4. PowerLead Puto PLD003 Side Panel Replacement: paso 3, imagen 1 de 1

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    Traducir

  5. PowerLead Puto PLD003 Side Panel Replacement: paso 4, imagen 1 de 1

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 10

Todo El Tiempo: 171