Cancelar

PowerBook G4 Titanium Onyx Lower Case Replacement

Escrito Por: iRobot (y 2 de otros participantes)

Comentarios: 0
Favoritos: 0

PowerBook G4 Titanium Onyx Lower Case Replacement

Dificultad

Moderar

Pasos

3

Tiempo Requerido

Sugerir un tiempo??

Introducción

The bottom case slides off easily after removing a few T8 Torx screws.

Herramientas

Comprar estas herramientas

T8 Torx Screwdriver

USD6.99

Comprar

Partes

G4 Titanium Onyx Lower Case

No esta de venta

Ver

Paso 1 Lower Case

Turn the G4 over.
Remove the eight T8 Torx screws from the lower case.

Paso 2

Using your thumbs, slide the lower case away from you.

Using your thumbs, slide the lower case away from you.
The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
Lift the lower case off.

Paso 3

Your laptop should look approximately like this.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Documentos Adjuntos

G4-Ti-Onyx-Screw-Guide.pdf

PDF - 324.52 kb

Ver

Autor

con 2 otros colaboradores

iRobot

Miembro Desde 24/09/09

1 Reputación

621 Guías creadas

+ 32 más insignias

0 Comentarios

Agregar un comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 3,746