Saltar al contenido principal

PowerBook G4 Titanium Onyx Keyboard Replacement

Qué necesitas

  1. PowerBook G4 Titanium Onyx Keyboard Replacement, Keyboard: paso 1, imagen 1 de 1
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. PowerBook G4 Titanium Onyx Keyboard Replacement: paso 2, imagen 1 de 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. PowerBook G4 Titanium Onyx Keyboard Replacement: paso 3, imagen 1 de 1
    • Your laptop should look approximately like this.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 5,123