Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
-
Ubique la lengüeta de liberación de la batería en la parte inferior del G4.
-
Deslice la lengüeta de liberación de la batería hacia la izquierda y levante la batería de la computadora.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the seven T8 Torx screws from the lower case.
-
Using your thumbs, slide the lower case toward the front of the computer.
-
The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
-
Lift the lower case off.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the hard drive ribbon from the logic board using a spudger or the tip of your finger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To free the hard drive, remove the two T8 Torx screws from the right wall of the battery housing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the hard drive by lifting the left edge up and out of the computer.
-
Cancelar: No complete esta guía.
10 personas más completaron esta guía.