Saltar al contenido principal

PowerBook G4 Titanium DVI Airport Card Replacement

Qué necesitas

  1. PowerBook G4 Titanium DVI Airport Card Replacement, Battery: paso 1, imagen 1 de 2 PowerBook G4 Titanium DVI Airport Card Replacement, Battery: paso 1, imagen 2 de 2
    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

  2. PowerBook G4 Titanium DVI Airport Card Replacement, Lower Case: paso 2, imagen 1 de 2 PowerBook G4 Titanium DVI Airport Card Replacement, Lower Case: paso 2, imagen 2 de 2
    • Remove the seven T8 Torx screws from the lower case.

    • Using your thumbs, slide the lower case toward the front of the computer.

    • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  3. PowerBook G4 Titanium DVI Airport Card Replacement, Airport Card: paso 3, imagen 1 de 1
    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

Conclusión

To reassemble your device, follow these instructions in reverse order.

19 personas más completaron esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 25

Todo El Tiempo: 22,289