Saltar al contenido principal

Introducción

Small metal finger located beneath the memory door.

  1. Use a coin to turn the battery locking screw 90 degrees to the right.
    • Use a coin to turn the battery locking screw 90 degrees to the right.

    • Lift the battery out of the computer.

  2. Remove the four Phillips screws from the memory door.
    • Remove the four Phillips screws from the memory door.

    • Slide the memory door away from the memory compartment.

  3. Remove the long black Phillips screw next to the memory card.
    • Remove the long black Phillips screw next to the memory card.

    • Remove the small EMI finger beneath the black screw.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 24/09/09

1 Reputación

624 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 4,107