Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

PowerBook G3 Pismo Keyboard Replacement

Introducción

Replacing this keyboard is easy. It requires no tools and takes only a few minutes.

Qué necesitas

  1. PowerBook G3 Pismo Keyboard Replacement, Keyboard: paso 1, imagen 1 de 1

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the track pad.

    Traducir

  3. PowerBook G3 Pismo Keyboard Replacement: paso 2, imagen 1 de 1

    • Pull the keyboard ribbon straight up from the logic board. Place the keyboard aside.

    • The connector may be tight. Gently rock the connector from side to side while pulling directly upward to free it. You can use this technique on many of the cards and cables you'll be disconnecting.

    • Make sure you have removed the laptop battery and CD/DVD modules from the expansion bays before proceeding.

    Traducir

  4. PowerBook G3 Pismo Keyboard Replacement: paso 3, imagen 1 de 1

    • Your laptop should look approximately like this.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Documentos Adjuntos

Autor

con 3 otros colaboradores

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

Insignias: 36

+ 33 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 19

Todo El Tiempo: 5,966