Saltar al contenido principal

PowerBook G3 Lombard Heat Shield Replacement

Qué necesitas

  1. PowerBook G3 Lombard Heat Shield Replacement, Keyboard: paso 1, imagen 1 de 1
    • Turn the computer so that the ports are facing you.

    • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

  2. PowerBook G3 Lombard Heat Shield Replacement: paso 2, imagen 1 de 1
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

  3. PowerBook G3 Lombard Heat Shield Replacement: paso 3, imagen 1 de 1
    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

    • In order to replace the keyboard, you must first remove the modem.

  4. PowerBook G3 Lombard Heat Shield Replacement, Heat Shield: paso 4, imagen 1 de 1
    • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

  5. PowerBook G3 Lombard Heat Shield Replacement: paso 5, imagen 1 de 1
    • Lift the heat shield up and pull it toward you.

  6. PowerBook G3 Lombard Heat Shield Replacement: paso 6, imagen 1 de 1
    • Your laptop should look approximately like this.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 2,534