Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the screen and turn the PowerBook over, orienting the computer upside down, using the label to guide you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Hold the button on the front left side and slide the battery out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With a Torx T8 screwdriver, remove the three Torx 24mm screws along the center of the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the computer over and open the display. You should see that the keyboard is loose.
-
Slightly lift the front of the keyboard up, and slide the keyboard towards yourself.
-
Carefully lift the top half of the keyboard and pull it towards yourself.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port.
-
Gently remove the ribbons from its tabs.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently wiggle the RAM card to loosen the connection until it pulls free.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.