Repara tus cosas Comunidad Tienda

PowerA Spectra Infinity Enhanced Faceplate Replacement

Introducción

Use this guide to replace/remove the faceplate of a Power A Spectra Infinity Enhanced Xbox controller.


The faceplate may need to be replaced if it is chipped, cracked, or scratched. Please ensure that the controller is not plugged in before taking it apart.

Qué necesitas

  1. PowerA Spectra Infinity Enhanced Faceplate Replacement, Motherboard: paso 1, imagen 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement, Motherboard: paso 1, imagen 2 de 2

    • Flip the controller so the back is facing up.

    Traducir

  2. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 2, imagen 1 de 1

    • Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

    Traducir

  3. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 3, imagen 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 3, imagen 2 de 2

    • Unlock the trigger locks before removing the backplate.

    • This will make taking the plate off easier.

    • Use your fingers and carefully remove the backplate.

    Traducir

  5. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 4, imagen 1 de 1

    • Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

    Traducir

  6. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 5, imagen 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 5, imagen 2 de 2

    • Use your hand to separate the motherboard from the face plate.

    Traducir

  7. PowerA Spectra Infinity Enhanced Faceplate Replacement, Faceplate: paso 6, imagen 1 de 1

    • Remove the buttons from the face plate (d-pad, action buttons, start/select, etc).

    Traducir

  8. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 7, imagen 1 de 1

    • Remove two 10 mm screws holding the bumper to the faceplate using a Phillips #0 screwdriver.

    Traducir

  9. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 8, imagen 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 8, imagen 2 de 2

    • Remove the single 7.9 mm screw holding the bumpers to the faceplate using a Phillips #0 screwdriver.

    Traducir

  10. PowerA Spectra Infinity Enhanced Faceplate Replacement: paso 9, imagen 1 de 1

    • Use your hand to separate the faceplate from the bumpers.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Kevyn Jorge

Miembro Desde 03/22/24

955 Reputación

6 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UMass Dartmouth, Team 6-5, Botvin Spring 2024 Miembro de UMass Dartmouth, Team 6-5, Botvin Spring 2024

UMASSD-BOTVIN-S24S6G5

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 47

Todo El Tiempo: 115