Saltar al contenido principal

Power Macintosh G3 Blue and White RAM Replacement

Qué necesitas

  1. Power Macintosh G3 Blue and White RAM Replacement, RAM: paso 1, imagen 1 de 1
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Power Macintosh G3 Blue and White RAM Replacement: paso 2, imagen 1 de 1
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

  3. Power Macintosh G3 Blue and White RAM Replacement: paso 3, imagen 1 de 2 Power Macintosh G3 Blue and White RAM Replacement: paso 3, imagen 2 de 2
    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

[deleted]

Miembro Desde 08/28/18

26,355 Reputación

21 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 16

Todo El Tiempo: 943