Introducción

I wasn’t able to find a replacement modem assembly online so you are on your own for that part.

Partes

No se requieren partes.

  1. Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

    Agregar Comentario

  2. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Agregar Comentario

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

    Agregar Comentario

    • Disconnect the modem’s flex cable from the connector on the logic board.

    Agregar Comentario

    • Lift the modem assembly out of it´s place on the logic board.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Miembro Desde 28/08/18

14,629 Reputación

22 Guías creadas

Equipo

NIWOTech Miembro de NIWOTech

Community

0 Miembros

0 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 15

Todo El Tiempo: 24