Introducción

These steps will show you how to install the top left cooling fan unit.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

  1. To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.
    • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

    • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

    Agregar Comentario

  2. Remove all the cables, including the power cables before opening the unit.
    • Remove all the cables, including the power cables before opening the unit.

    Agregar Comentario

    • Lift the tab to unlock the side panel.

    • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Remove the air deflector (the clear plastic cover) by pulling on the handle.

    Agregar Comentario

    • Locate the top left cooling fan unit.

    Agregar Comentario

    • Pull the fan straight out from its slot. You will need to remove two cables from the motherboard.

      • It may be easier to reach the cables if you remove the PCI guide (next to the fan unit) first.

    Agregar Comentario

    • After pulling out the fan unit, the area should look like this.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

19 personas más completaron esta guía.

Salvador Aguilar

Miembro Desde 21/01/10

2,370 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 5-8, Forte Winter 2010 Miembro de Cal Poly, Team 5-8, Forte Winter 2010

CPSU-FORTE-W10S5G8

7 Miembros

11 Guías creadas

Actually you do need to remove the plastic air deflector, as the fan in question is behind it.

Tim downing - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 5

Últimos 30 Días: 33

Todo El Tiempo: 17,259