Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate hard drive on the top right-hand corner of the desktop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate up plastic tab labeled "B" on the right hand side of hard drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After hard drive is out, the space should look like this.
-
Cancelar: No complete esta guía.
101 personas más completaron esta guía.
Equipo
Cal Poly, Team 5-8, Forte Winter 2010 Miembro de Cal Poly, Team 5-8, Forte Winter 2010
CPSU-FORTE-W10S5G8
7 Miembros
15 Guías creadas
8 comentarios
I've tried many times to remove this and my other misplaced comment duplicate, but here they'll stay apparently... you're free to delete them if you can.
Petteri -
REMOVE the plastic cover to avoid knocking it off in the process of working on the drive bays. (Just a precaution - kind of like not setting a glass of red wine on an elegant white table cloth.)
EyeSpye -
The Comments appended to these instructions are VERY helpful. If you read them you will save time, and avoid some of the mistakes I made - particularly with respect to the Drive mounting screws located to the left side of the drive installation bays, and the need to remove the bottom drive FIRST if you wish to access the top drive. THANKS for a great set of instructions.
This was helpful! Excellent photographs and clear, simple instructions. Thanks, Jessica and iFixit!
I used these instructions to remove an additional hard drive while leaving the original hard drive in place. I did not know which one to remove, as the hard drives do not have side labels, so I guessed: the original drive was on top, the additional drive on the bottom. It might be helpful for other viewers to know what to do in a similar situation.
Cheers.
