Introducción

Use this guide to replace the front fan assembly on your Power Mac G5.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.
  • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

  • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

Agregar Comentario

Remove all the cables, including the power cables before opening the unit.
  • Remove all the cables, including the power cables before opening the unit.

Agregar Comentario

  • Lift the tab to unlock the side panel.

  • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

Agregar Comentario

  • Remove the air deflector (the clear plastic cover) by pulling on the handle.

Agregar Comentario

  • Locate the front fan assembly.

Agregar Comentario

  • Pull the fan assembly out; it should slide out easily.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

23 personas más completaron esta guía.

Adam

Miembro Desde 22/01/10

706 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 5-8, Forte Winter 2010 Miembro de Cal Poly, Team 5-8, Forte Winter 2010

CPSU-FORTE-W10S5G8

7 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 11

Últimos 30 Días: 29

Todo El Tiempo: 17,025