Skip to main content

Power Mac G4 Quicksilver video adapter card replacement

What you need

  1. Power Mac G4 Quicksilver video adapter card replacement, Opening the case: step 1, image 1 of 1
    • The handle to open your computer is located on top of the right side panel.

  2. Power Mac G4 Quicksilver video adapter card replacement: step 2, image 1 of 2 Power Mac G4 Quicksilver video adapter card replacement: step 2, image 2 of 2
    • Grab the circular handle and pull outward.

  3. Power Mac G4 Quicksilver video adapter card replacement: step 3, image 1 of 1
    • Your computer is now open and ready for repair.

  4. Power Mac G4 Quicksilver video adapter card replacement, Video Adapter: step 4, image 1 of 1
    • This is your Power Mac G4's video adapter.

  5. Power Mac G4 Quicksilver video adapter card replacement: step 5, image 1 of 1
    • Start by removing the screw holding the card to the chassis as shown.

  6. Power Mac G4 Quicksilver video adapter card replacement: step 6, image 1 of 1
    • Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.

  7. Power Mac G4 Quicksilver video adapter card replacement: step 7, image 1 of 2 Power Mac G4 Quicksilver video adapter card replacement: step 7, image 2 of 2
    • With the tab and screw removed, lift the card straight out.

    • When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 other people completed this guide.

Cameron Christensen

Member since: 01/20/10

590 Reputation

3 Guides authored

Team

Cal Poly, Team 14-41, Regan Winter 2010 Member of Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Members

17 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 4,123