Saltar al contenido principal

Power Mac G4 Quicksilver Optical Drive Replacement

Qué necesitas

  1. Power Mac G4 Quicksilver Optical Drive Replacement, Opening the case: paso 1, imagen 1 de 1
    • The handle to open your computer is located on top of the right side panel.

  2. Power Mac G4 Quicksilver Optical Drive Replacement: paso 2, imagen 1 de 2 Power Mac G4 Quicksilver Optical Drive Replacement: paso 2, imagen 2 de 2
    • Grab the circular handle and pull outward.

  3. Power Mac G4 Quicksilver Optical Drive Replacement: paso 3, imagen 1 de 1
    • Your computer is now open and ready for repair.

  4. Power Mac G4 Quicksilver Optical Drive Replacement, Power Mac G4 Quicksilver Optical Drive Disassembly: paso 4, imagen 1 de 1
    • The optical drive is in the top left corner of the case.

  5. Power Mac G4 Quicksilver Optical Drive Replacement: paso 5, imagen 1 de 2 Power Mac G4 Quicksilver Optical Drive Replacement: paso 5, imagen 2 de 2
    • There are four screws to be removed.

    • The first screw can be seen in the first picture.

    • The remaining three screws can be seen in the second picture.

  6. Power Mac G4 Quicksilver Optical Drive Replacement: paso 6, imagen 1 de 1
    • Remove the optical drive by pulling the drive away from the front of the computer and out.

  7. Power Mac G4 Quicksilver Optical Drive Replacement: paso 7, imagen 1 de 1
    • Detach the two cables attached to the back of the drive.

    • The flat ribbon cable can be detached by pulling the silver tab. The multicolored cable can be removed by grasping the plastic connector on either side and pulling with substantial force.

  8. Power Mac G4 Quicksilver Optical Drive Replacement, Optical Drive: paso 8, imagen 1 de 1
    • Remove the four screws holding the enclosure to the drive.

  9. Power Mac G4 Quicksilver Optical Drive Replacement: paso 9, imagen 1 de 1
    • Push on the back of the drive (side with the connectors) to slide the drive out of the enclosure.

    • Your optical drive is now ready to be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Ryan Bylard

Miembro Desde 01/20/10

1,325 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 14-41, Regan Winter 2010 Miembro de Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Miembros

17 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 17

Todo El Tiempo: 11,217