Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Power Mac G4 Quicksilver Hard Drive Replacement

Guía Archivada
Esta guía se mantiene únicamente para fines históricos. Utiliza la última versión de la guía para llevar a cabo tu reparación.

Qué necesitas

  1. Power Mac G4 Quicksilver Hard Drive Replacement, Hard Drive: paso 1, imagen 1 de 1
    • The hard drive is located in the back right corner of the case.

  2. Power Mac G4 Quicksilver Hard Drive Replacement: paso 2, imagen 1 de 1
    • Remove the flat ribbon cable by pulling with substantial force.

  3. Power Mac G4 Quicksilver Hard Drive Replacement: paso 3, imagen 1 de 1
    • Remove the screw holding the hard drive to the computer.

  4. Power Mac G4 Quicksilver Hard Drive Replacement: paso 4, imagen 1 de 1
    • Pull the drive up and out of the computer.

  5. Power Mac G4 Quicksilver Hard Drive Replacement: paso 5, imagen 1 de 1
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Ryan Bylard

Miembro Desde 01/20/10

1,325 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 14-41, Regan Winter 2010 Miembro de Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Miembros

17 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 7,342