Introducción

This is meant to be a private prereq guide.

Partes

No se requieren partes.

  1. The hard drive is located in the back right corner of the case.
    • The hard drive is located in the back right corner of the case.

  2. Remove the flat ribbon cable by pulling with substantial force.
    • Remove the flat ribbon cable by pulling with substantial force.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the screw holding the hard drive to the computer.
    • Remove the screw holding the hard drive to the computer.

  5. Pull the drive up and out of the computer.
    • Pull the drive up and out of the computer.

  6. Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Ryan Bylard

Miembro Desde 20/01/10

1,275 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 14-41, Regan Winter 2010 Miembro de Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 7,205