Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Tira del pestillo exterior.
-
Baja la puerta hasta que esté nivelada con tu superficie de trabajo.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the spudger to pry the clips horizontally off of the heat sink.
-
Fully remove the clips by lifting upwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the heat sink by pulling upwards, off of the logic board.
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.