Introducción

This guide will illustrate how to remove the heat sink from your PowerMac.

Partes

No se requieren partes.

Pull on outer latch.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Agregar Comentario

Use the spudger to pry the clips horizontally off of the heat sink.
  • Use the spudger to pry the clips horizontally off of the heat sink.

  • Fully remove the clips by lifting upwards.

Agregar Comentario

  • Remove the heat sink by pulling upwards, off of the logic board.

Agregar Comentario

Linea de Meta

6 personas más completaron esta guía.

Justin Petrilli

Miembro Desde 21/01/10

2,619 Reputación

11 Guías creadas

Equipo

Cal Poly, Team 13-24, Maness Winter 2010 Miembro de Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 10

Todo El Tiempo: 5,108