Introducción

Installing the video card involves removing the outer case before actual installation.

Partes

No se requieren partes.

  1. Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case. Push back the handle after you have taken the core out of the case. Push back the handle after you have taken the core out of the case.
    • Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.
    • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

  3. Slowly lift the plate off the cube and disconnect the power cord.
    • Slowly lift the plate off the cube and disconnect the power cord.

  4. Remove the four pillars from each corner.
    • Remove the four pillars from each corner.

    • The pillars should come out fairly easily.

  5. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  6. Remove the screws on the back of the VGA port.
    • Remove the screws on the back of the VGA port.

  7. Remove the screw attaching the video card to the logic board.
    • Remove the screw attaching the video card to the logic board.

  8. Remove power cord from the video card. Remove power cord from the video card.
    • Remove power cord from the video card.

  9. Remove the power cord.
    • Remove the power cord.

    • Remove the connector.

    • Remove the video card from the logic board.

  10. Carefully lift the video card from the logic board.
    • Carefully lift the video card from the logic board.

    • The video card should come out easily.

  11. Separate the video card from the adapter. Separate the video card from the adapter.
    • Separate the video card from the adapter.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Ryan Chun

Miembro Desde 24/06/10

674 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 2-7, Johann Summer 2010 Miembro de Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

5 Miembros

7 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 9

Últimos 30 Días: 40

Todo El Tiempo: 8,786