Repara tus cosas Comunidad Tienda

Porter-Cable PC60TAG Power Cord Replacement

Introducción

Often times power cords can get damaged through long-term use, or mishandling of the device. Whatever the case, the power cord of the Porter-Cable PC60TAG can be replaced in a few easy steps.

Qué necesitas

  1. Porter-Cable PC60TAG Power Cord Replacement, Power Cord: paso 1, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips head screw on the back cover.

    • Unplug the grinder before disassembling.

    Editar

  2. Porter-Cable PC60TAG Power Cord Replacement: paso 2, imagen 1 de 1

    • Holding the front of the device, carefully slide the back cover over the cord.

    Editar

  4. Porter-Cable PC60TAG Power Cord Replacement: paso 3, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the two 1/2" Phillips head screws securing the cord grip.

    Editar

  5. Porter-Cable PC60TAG Power Cord Replacement: paso 4, imagen 1 de 1

    • Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

    Editar

  6. Porter-Cable PC60TAG Power Cord Replacement: paso 5, imagen 1 de 1

    • Careful remove each wire from the power cord from underneath the terminals.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Mackenzie Fairbanks

Miembro Desde 03/24/16

591 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 Miembro de UMass Dartmouth, Team 2-2, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G2

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 439