Repara tus cosas Comunidad Tienda

Porter-Cable PC60TAG Pinion Gear Replacement

Qué necesitas

  1. Porter-Cable PC60TAG Pinion Gear Replacement, Pinion Gear: paso 1, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the 3/4" screw on the back cover.

    Editar

  2. Porter-Cable PC60TAG Pinion Gear Replacement: paso 2, imagen 1 de 1

    • Holding the front of the device, carefully slide the back cover over the cord.

    Editar

  3. Porter-Cable PC60TAG Pinion Gear Replacement: paso 3, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the 1/2" screw holding on the motor brush arm. Repeat on the other side.

    Editar

  4. Porter-Cable PC60TAG Pinion Gear Replacement: paso 4, imagen 1 de 1

    • Carefully pull the motor brush arm away from the other device, you can leave the wire connected to device. Repeat on the other side.

    Editar

  5. Porter-Cable PC60TAG Pinion Gear Replacement: paso 5, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the 1 inch black retainer screw.

    Editar

  7. Porter-Cable PC60TAG Pinion Gear Replacement: paso 6, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the four, 1/2" Phillips screws around the head gear.

    Editar

  8. Porter-Cable PC60TAG Pinion Gear Replacement: paso 7, imagen 1 de 1

    • Carefully pull the head gear away from the device, and set aside.

    Editar

  9. Porter-Cable PC60TAG Pinion Gear Replacement: paso 8, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the two 1/2" Phillips screws holding the head to the body on the bottom side of the grinder.

    Editar

  10. Porter-Cable PC60TAG Pinion Gear Replacement: paso 9, imagen 1 de 1

    • Using the Phillips #2 screwdriver, remove the other two 1/2" Phillips screws holding the head to the body on the top side of the grinder.

    Editar

  11. Porter-Cable PC60TAG Pinion Gear Replacement: paso 10, imagen 1 de 1

    • Holding the head of the device, carefully pull the motor assembly out of the body of the device.

    Editar

  12. Porter-Cable PC60TAG Pinion Gear Replacement: paso 11, imagen 1 de 1

    • Using a 9/16" wrench, loosen the spindle nut inside the head, from the motor assembly.

    Editar

  13. Porter-Cable PC60TAG Pinion Gear Replacement: paso 12, imagen 1 de 1

    • Pull the motor assembly away from the head, and set aside

    Editar

  14. Porter-Cable PC60TAG Pinion Gear Replacement: paso 13, imagen 1 de 1

    • Using a pair of needle nose pliers, remove the pinion gear from the head.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Mackenzie Fairbanks

Miembro Desde 03/24/16

591 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 Miembro de UMass Dartmouth, Team 2-2, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G2

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 11

Todo El Tiempo: 654