Repara tus cosas Comunidad Tienda

Porter-Cable 382 On/ Off Switch Replacement

Qué necesitas

  1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: paso 1, imagen 1 de 2 Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: paso 1, imagen 2 de 2

    • First, locate the three screws on the top of the sander.

    • Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

    Editar

  3. Porter-Cable 382 On/ Off Switch Replacement: paso 2, imagen 1 de 2 Porter-Cable 382 On/ Off Switch Replacement: paso 2, imagen 2 de 2

    • Locate your on off switch and in order to remove it you must slide it out of its slot.

    • This shouldnt require any special tools, just wiggle the switch up and out.

    • Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

    Editar

  4. Porter-Cable 382 On/ Off Switch Replacement: paso 3, imagen 1 de 1

    • Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.

    • Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Nick O'Sadcia

Miembro Desde 03/11/16

421 Reputación

3 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

UMass Dartmouth, Team 8-7, Botvin Spring 2016 Miembro de UMass Dartmouth, Team 8-7, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G7

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 224