Saltar al contenido principal

Polycom SoundStation Back Housing Replacement

Qué necesitas

  1. Polycom SoundStation Back Housing Replacement, Back Housing: paso 1, imagen 1 de 1
    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

  2. Polycom SoundStation Back Housing Replacement: paso 2, imagen 1 de 2 Polycom SoundStation Back Housing Replacement: paso 2, imagen 2 de 2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

Miembro Desde 09/02/14

431 Reputación

4 Guías creadas

Equipo

Un comentario

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 1,150